Menu

Voice Prompt

Options

Main Menu

“Enter a Menu Option”

Press “*” for the next menu option

Press “#” to return to the main menu

Enter 01-05, 07,10, 12-17,47 or 99 menu options

01

“DHCP Mode”,

“Static IP Mode”

Press “9” to toggle the selection

If using “Static IP Mode”, configure the IP address information using menus 02 to 05.

If using “Dynamic IP Mode”, all IP address information comes from the DHCP server automatically after reboot.

02

“IP Address “ + IP address

The current WAN IP address is announced

If using “Static IP Mode”, enter 12 digit new IP address.

03

“Subnet “ + IP address

Same as menu 02

04

“Gateway “ + IP address

Same as menu 02

05

“DNS Server “ + IP address

Same as menu 02

07

Preferred Vocoder

Press “9” to move to the next selection in the list:

• PCM U / PCM A

• iLBC

• G-726

• G-723

• G-729

10

“MAC Address”

Announces the Mac address of the unit.

12

WAN Port Web Access

Press “9” to toggle between enable / disable

13

Firmware Server IP Address

Announces current Firmware Server IP address. Enter 12 digit new IP address.

14

Configuration Server IP Address

Announces current Config Server Path IP address. Enter 12 digit new IP address.

15

Upgrade Protocol

Upgrade protocol for firmware and configuration update. Press “9” to toggle between TFTP / HTTP

16

Firmware Version

Firmware version information.

17

Firmware Upgrade

Firmware upgrade mode. Press “9” to toggle among the following three options:

- always check

- check when pre/suffix changes

- never upgrade

47

“Direct IP Calling”

Enter the target IP address to make a direct IP call, after dial tone. (See “Make a Direct IP Call”.)

99

“RESET”

Press “9” to reboot the device

Enter MAC address to restore factory default setting

(See Restore Factory Default Setting section)

“Invalid Entry”

Automatically returns to main menu